|
|
|
|
|
 |
CLAMP TYPE PART OFF TOOL CTPT1-Two peice rigid construction, 100% clamping power, use it in front or rear slide, comes with 10 mm blade. |
|
14.95 |
|
|
SPARE 10 mm BLADE FOR CTPT2 |
|
07.95 |
|
|
CLAMP TYPE PART OFF TOOL 10PT1-Two peice rigid construction, 100% clamping power, use it in front or rear slide, comes with 10 mm blade. |
|
14.95 |
|
|
SPARE 10 mm BLADE FOR 10PT2 |
|
07.95 |
|
 |
MINI CLAMP TYPE PARTING HOLDER CTPTS-6 mm Holder with 5 mm blade. Similar to above but with small shanks for Unimat lathes etc. |
|
08.50 |
|
|
MINI CLAMP TYPE PARTING HOLDER CTPT8-10 mm Holder with 5 mm blade. Similar to above but with small shanks for Unimat lathes etc. |
|
09.50 |
|
 |
SMALL PARTING TOOL 6 mm SHANK TPT000-Comes with 3/16" x 1/16" blade |
|
09.95 |
|
|
SMALL PARTING TOOL 8 mm SHANK PT001-Comes with 3/16" x 1/16" blade |
|
10.75 |
|
|
SMALL PARTING TOOL 10 mm SHANK PT0010-Comes with 3/16" x 1/16" blade |
|
11.95 |
|
 |
PARTING OFF TOOLHOLDERS & BLADE TPT003-Ideal for the smaller lathes, small shank but good rigidity, comes with blade. Shank size 5/8" hgh x 5/16" wide x 3.1/2" long |
|
15.95 |
|
|
PARTING OFF TOOLHOLDERS & BLADE TPT004-Ideal for the smaller lathes, small shank but good rigidity, comes with blade. Shank size 3/4" hgh x 5/16" wide x 4.1/2" long |
|
19.95 |
|
 |
KNURLING TOOL HOLDERS MKT1755-Shank 5/16" x 3/4" x 5" long.Complete with 2 knurling wheels 5/8" dia. x 3/16" thick x 7/32" hole in medium diamond pattern. |
|
13.95 |
|
 |
MULTI HEAD KNURLING TOOL MKT2000-Revolving head, locknut adjustment, 5/16" x 3/4" x 3" long shank, complete with 3 pairs of 5/8" diameter diamond pattern knurling wheels, fine medium and coarse. |
|
20.95 |
|
 |
CLAMP TYPE KNURLING TOOL MCT2-Shank size 10 mm square, fully adjustable knurl carrying arms for reduced load when knurling, maximum opening 50 mm, comes with pair of 3/4" medium diamond knurls. |
|
24.00 |
|
 |
MINI CLAMP TYPE KNURLING TOOL MCT1-5/16" Shank 5/16" square, suitable for smaller lathes, Hobbymat, Unimat etc. |
|
15.00 |
|
 |
HSS KNURLING WHEELS KNO1-Straight fine 5/8" dia. x 7/32" bore, heat treated, tempered and tested. Price per pair. |
|
04.00 |
|
 |
HSS KNURLING WHEELS KNO2-Straight medium 5/8" dia. x 7/32" bore, heat treated, tempered and tested. Price per pair. |
|
03.85 |
|
 |
HSS KNURLING WHEELS KNO3-Straight coarse 5/8" dia. x 7/32" bore, heat treated, tempered and tested. Price per pair. |
|
03.85 |
|
 |
HSS KNURLING WHEELS KNO4-Diamond fine 5/8" dia. x 7/32" bore, heat treated, tempered and tested. Price per pair. |
|
03.85 |
|
 |
HSS KNURLING WHEELS KNO5-Diamond medium 5/8" dia. x 7/32" bore, heat treated, tempered and tested. Price per pair. |
|
03.85 |
|
 |
HSS KNURLING WHEELS KNO6-Diamond coarse 5/8" dia. x 7/32" bore, heat treated, tempered and tested. Price per pair. |
|
03.85 |
|
|
HSS KNURLING WHEELS KNO7-Straight fine 3/4" dia. x 1/4" bore, heat treated, tempered and tested. Price per pair. |
|
03.85 |
|
|
HSS KNURLING WHEELS KNO8-Straight medium 3/4" dia. x 1/4" bore, heat treated, tempered and tested. Price per pair. |
|
03.85 |
|
|
HSS KNURLING WHEELS KNO9-Straight coarse 3/4" dia. x 1/4" bore, heat treated, tempered and tested. Price per pair. |
|
03.85 |
|
|
HSS KNURLING WHEELS KNO10-Diamond fine 3/4" dia. x 1/4" bore, heat treated, tempered and tested. Price per pair. |
|
03.85 |
|
|
HSS KNURLING WHEELS KNO11-Diamond medium 3/4" dia. x 1/4" bore, heat treated, tempered and tested. Price per pair. |
|
03.85 |
|
|
HSS KNURLING WHEELS KNO12-Diamond coarse 3/4" dia. x 1/4" bore, heat treated, tempered and tested. Price per pair. |
|
03.85 |
|
 |
HSS SLITTING SAW SS313276-Quality HSS Slitting saw 3" dia. x 1/32" thick x 76 teeth. 1" Bore and keyway |
|
09.95 |
|
|
HSS SLITTING SAW SS311676-Quality HSS Slitting saw 3" dia. x 1/16" thick x 76 teeth. 1" Bore and keyway |
|
12.00 |
|
|
HSS SLITTING SAW SS31876-Quality HSS Slitting saw 3" dia. x 1/8" thick x 76 teeth. 1" Bore and keyway |
|
15.00 |
|
