|
|
|
|
|
 |
WAVY PARALLEL BARS 54237050-High quality spring steel, hardened, ground and stress relieved. Range: 1/2" to 1.1/2" in 1/8" height increments. Height and parallelism accuracy is 0.002" |
|
35.00 |
|
 |
ADJUSTABLE SQUARE SS125-Precision ground with adjustable blades in stainless steel |
|
16.95 |
|
 |
CENTRE SQUARES 80 mm CSQ1-Made from tool steel, hardened and tempered blade. Fast and accurate location of centre of face of a round disc. |
|
05.95 |
|
|
CENTRE SQUARES 140 mm CSQ2-Made from tool steel, hardened and tempered blade. Fast and accurate location of centre of face of a round disc. |
|
08.75 |
|
 |
ENGINEERS SQUARES 2" TES2-Made of the finest steel. Hardened blade, accuracy to BS929. Acurate inside and outside |
|
03.20 |
|
|
ENGINEERS SQUARES 3" TES3-Made of the finest steel. Hardened blade, accuracy to BS929. Acurate inside and outside |
|
04.45 |
|
|
ENGINEERS SQUARES 4" TES4-Made of the finest steel. Hardened blade, accuracy to BS929. Acurate inside and outside |
|
04.95 |
|
|
ENGINEERS SQUARES 6" TES6-Made of the finest steel. Hardened blade, accuracy to BS929. Acurate inside and outside |
|
05.95 |
|
|
ENGINEERS SQUARES 9" TES9-Made of the finest steel. Hardened blade, accuracy to BS929. Acurate inside and outside |
|
08.95 |
|
 |
COMBINED DEPTH GAUGE PROTRACTOR DGP1-Stainless steel, graduated. |
|
07.00 |
|
 |
PROTRACTOR MP965-Measures angles 0-18 degrees. Stainless steel with locknut. |
|
04.75 |
|
 |
BORE GAUGE DG52- Metric and imperial depth gauge, 6" / 150 mm Ideal for measuring deep bores. Stainless steel. |
|
04.95 |
|
 |
DEPH GAUGE DPH43-Stainless steel rule 6" / 150 mm with hardened and ground steel base, spring tension nut for easy depth measurement. |
|
04.75 |
|
 |
RULE 6" TSR1-Combined imperial and metric markings. |
|
01.50 |
|
|
RULE 12" TSR2-12" Combined imperial and metric markings. |
|
02.00 |
|
 |
DIGITAL VERNIER DGCAL1-Measures 0" to 6" / 0.0 mm to 150 mm, stainless steel body and jaws, fine adjustment thumb wheel, direct coversion imperial to metric, knurled locking screw and depth rod. Resolution 0.01 mm / .005" |
|
31.75 |
|
 |
DIAL CALIPERS DCM100-Size 100 mm Stainless steel body and hardened jaws, internal, external, step and depth measurements, adjustable dial is graduated in 0.001 divisions, reads 0" - 1" per rev over the range. Fitted with lock for fixed measurement |
|
13.95 |
|
|
DIAL CALIPERS DCM4-Size 4" Stainless steel body and hardened jaws, internal, external, step and depth measurements, adjustable dial is graduated in 0.001 divisions, reads 0" - 1" per rev over the range. Fitted with lock for fixed measurement |
|
13.95 |
|
|
DIAL CALIPERS DCM1-Size 0 to 150 mm Stainless steel body and hardened jaws, internal, external, step and depth measurements, adjustable dial is graduated in 0.001 divisions, reads 0" - 1" per rev over the range. Fitted with lock for fixed measurement |
|
15.95 |
|
|
DIAL CALIPERS DCM2-Size 0 to 6" Stainless steel body and hardened jaws, internal, external, step and depth measurements, adjustable dial is graduated in 0.001 divisions, reads 0" - 1" per rev over the range. Fitted with lock for fixed measurement |
|
15.95 |
|
|
DUEL DIAL CALIPERS DCM3-Size 6" & 150 mm Stainless steel body and hardened jaws, internal, external, step and depth measurements, adjustable dial is graduated in 0.001 divisions, reads 0" - 1" per rev over the range. Fitted with lock for fixed measurement |
|
32.00 |
|
 |
BRASS POCKET VERNIER BV7-Size 4" - 100 mm extremely popular economy vernier. |
|
04.25 |
|
 |
NUMERIC READOUT MICROMETER NRM25-Size 0 to 25 mm Digital micrometer with carbide faces and mechanical digital read out. |
|
21.85 |
|
|
NUMERIC READOUT MICROMETER NRM01-Size 0 to 1" Digital micrometer with carbide faces and mechanical digital read out. |
|
21.85 |
|
 |
DIGITAL MICROMETER EDM25-Size 0 to 25 mm x 0.001 mm direct metric / imperial conversion and reset zero button. |
|
45.00 |
|
 |
MICROMETERS 0 mm to 25 mm TM25-These micrometers are very accurate ( +/- 0.002 mm ) Cast iron frame, carbide faces with hammertone finish. |
|
10.50 |
|
|
MICROMETERS 25 mm to 50 mm TM50-These micrometers are very accurate ( +/- 0.002 mm ) Cast iron frame, carbide faces with hammertone finish. |
|
11.50 |
|
|
MICROMETERS 50 mm to 75 mm TM75-These micrometers are very accurate ( +/- 0.002 mm ) Cast iron frame, carbide faces with hammertone finish. |
|
16.85 |
|
|
MICROMETERS 75 mm to 100 mm TM100-These micrometers are very accurate ( +/- 0.002 mm ) Cast iron frame, carbide faces with hammertone finish. |
|
21.50 |
|
|
MICROMETERS 0" to 1" TM01-These micrometers are very accurate ( +/- 0.002 mm ) Cast iron frame, carbide faces with hammertone finish. |
|
10.50 |
|
