|
|
|
|
|
 |
FLYCUTTER TOOL HOLDERS FC3-Counterbalanced to give a smoother finish, machines up to 6" wide. Set of 3 |
|
15.50 |
|
 |
LITTLE HOGGER INDEXABLE END MILL SET LHS-1" Diameter head, 3/4" shank 2 flute, carbide tips. Mill at 5 times the speed of high speed steel, feed at average rate of 12" per minute.Set of 3 |
|
31.25 |
|
 |
9 PEICE CARBIBE BORING BAR SET BBS2-3/8" Shanks ground to + 0-0005", Chatter free, will bore out flat bottom holes and face workpeice. Ideal for 2" BORING HEAD pictured below |
|
14.65 |
|
|
9 PEICE CARBIBE BORING BAR SET BBS3-1/2" Shanks ground to + 0-0005", Chatter free, will bore out flat bottom holes and face workpeice. Ideal for 2" BORING HEAD pictured below |
|
16.65 |
|
|
12 PEICE CARBIBE BORING BAR SET BBS58-5/8" Shanks ground to + 0-0005", Chatter free, will bore out flat bottom holes and face workpeice. Ideal for 2" BORING HEAD pictured below |
|
30.60 |
|
|
7 PEICE CARBIBE BORING BAR SET BBS4-3/4" Shanks ground to + 0-0005", Chatter free, will bore out flat bottom holes and face workpeice. Ideal for 2" BORING HEAD pictured below |
|
39.60 |
|
|
9 PEICE CARBIBE BORING BAR SET BBS6-10 mm Shanks ground to + 0-0005", Chatter free, will bore out flat bottom holes and face workpeice. Ideal for 2" BORING HEAD pictured below |
|
14.65 |
|
|
9 PEICE CARBIBE BORING BAR SET BBS7-12 mm Shanks ground to + 0-0005", Chatter free, will bore out flat bottom holes and face workpeice. Ideal for 2" BORING HEAD pictured below |
|
16.65 |
|
|
12 PEICE CARBIBE BORING BAR SET BBS8-16 mm Shanks ground to + 0-0005", Chatter free, will bore out flat bottom holes and face workpeice. Ideal for 2" BORING HEAD pictured below |
|
30.60 |
|
|
7 PEICE CARBIBE BORING BAR SET BBS9-20 mm Shanks ground to + 0-0005", Chatter free, will bore out flat bottom holes and face workpeice. Ideal for 2" BORING HEAD pictured below |
|
39.60 |
|
 |
2" BORING HEAD SHANK 1MT BH1MT-2" Adjustable head, removable shank, accepts 1/2" boring tools, drawbar 1/4" BSW |
|
55.00 |
|
|
2" BORING HEAD SHANK 2MT BH1MT-2" Adjustable head, removable shank, accepts 1/2" boring tools, drawbar 3/8" BSW |
|
55.00 |
|
|
2" BORING HEAD SHANK 3MT BH1MT-2" Adjustable head, removable shank, accepts 1/2" boring tools, drawbar 1/4" BSW |
|
55.00 |
|
|
9 Peice CARBIDE BORING BAR SET BBS3-Set of 9 boring bars 1/2" shank. Suitable for 2" Boring head. |
|
16.65 |
|
|
2" BORING HEAD 1MT BH1MT- 2" Diameter adjustable head, the removable shank is tapped for a drawbar, 1/4" BSW, accepts 1/2" diameter boring tools. |
|
55.00 |
|
|
2" BORING HEAD 1MT BH2MT- 2" Diameter adjustable head the removable shank is tapped for a drawbar, 3/8" BSW, accepts 1/2" diameter boring tools. |
|
55.00 |
|
|
2" BORING HEAD 1MT BH3MT- 2" Diameter adjustable head the removable shank is tapped for a drawbar, 3/8" BSW, accepts 1/2" diameter boring tools. |
|
55.00 |
|
|
2" BORING HEAD 1MT BH8RT- 2" Diameter adjustable head the removable shank is tapped for a drawbar, 7/17" UNF, accepts 1/2" diameter boring tools. |
|
55.00 |
|
 |
9 PIECE BORING BAR SET BBS3- Set of 9 carbide boring bars to fit above |
|
17.50 |
|
 |
DOUBLE ENDED BORRING SET BBS11-Set of 4 round boring bars with broached holes to accept standard HSS toolbits, sizes 1/4" - 5/16" -3/8" - 7/16" |
|
11.95 |
|
 |
BORING BAR WITH HOLDER BBH95-Double ended boring bars with 90 deg & 45 deg. square ends. 9.50 mm dia. Bar x 14.00 mm square holder. Toolbit not included. |
|
04.95 |
|
|
BORING BAR WITH HOLDER BBH11-Double ended boring bars with 90 deg & 45 deg. square ends. 11.00 mm dia. Bar x 16.00 mm square holder. Toolbit not included. |
|
05.95 |
|
|
BORING BAR WITH HOLDER BBH14-Double ended boring bars with 90 deg & 45 deg. square ends. 14.00 mm dia. Bar x 19.00 mm square holder. Toolbit not included. |
|
07.65 |
|
 |
BETWEEN CENTRES BORING BAR-2/2" diameter x 9" long, comes with 1/8" round toolbit & Allen key. Ideal for borng cylinders etc. |
|
10.00 |
|
 |
HOLDER FOR ROUND TOOLSTEEL TH01-5/16" Square holder, double ended, accepts 3/16" & 1/4" round toolbits, allows you to use round toolbits in your cross slide. |
|
02.75 |
|
 |
HOLDER FOR ROUND TOOLSTEEL TH02-1/2"" Square holder, double ended, accepts 5/16" & 3/8" round toolbits, allows you to use round toolbits in your cross slide. |
|
03.75 |
|
