|
|
|
|
|
 |
LATHE LIVE CENTRE LC1- Double bearing mechanism with hardened centre shaft and special steel housing. Run out within 0.002" |
|
22.75 |
|
|
LATHE LIVE CENTRE LC2- Double bearing mechanism with hardened centre shaft and special steel housing. Run out within 0.002" |
|
22.75 |
|
|
LATHE LIVE CENTRE LC3- Double bearing mechanism with hardened centre shaft and special steel housing. Run out within 0.002" |
|
24.25 |
|
 |
LATHE CENTRE DC1 1 MT- Included angle 60 degrees, precision ground to close tolerances. |
|
02.70 |
|
|
LATHE CENTRE DC2 2 MT- Included angle 60 degrees, precision ground to close tolerances. |
|
03.75 |
|
|
LATHE CENTRE DC3 3 MT- Included angle 60 degrees, precision ground to close tolerances. |
|
04.50 |
|
 |
LATHE HALF CENTRE DC1-1 MTIncluded angle 60 degrees, precision ground to close tolerances. |
|
03.10 |
|
|
LATHE HALF CENTRE DC2-1 MTIncluded angle 60 degrees, precision ground to close tolerances. |
|
04.15 |
|
|
LATHE HALF CENTRE DC3-1 MTIncluded angle 60 degrees, precision ground to close tolerances. |
|
05.85 |
|
 |
SOLID MORSE TAPER SOCKET SOL1-Morse taper socket with morse taper inside and parallel body outside |
|
05.95 |
|
 |
2" BORING HEAD 1MT BH1MT- 2" Diameter adjustable head, the removable shank is tapped for a drawbar, 1/4" BSW, accepts 1/2" diameter boring tools. |
|
55.00 |
|
|
2" BORING HEAD 1MT BH2MT- 2" Diameter adjustable head the removable shank is tapped for a drawbar, 3/8" BSW, accepts 1/2" diameter boring tools. |
|
55.00 |
|
|
2" BORING HEAD 1MT BH3MT- 2" Diameter adjustable head the removable shank is tapped for a drawbar, 3/8" BSW, accepts 1/2" diameter boring tools. |
|
55.00 |
|
|
2" BORING HEAD 1MT BH8RT- 2" Diameter adjustable head the removable shank is tapped for a drawbar, 7/17" UNF, accepts 1/2" diameter boring tools. |
|
55.00 |
|
 |
9 PIECE BORING BAR SET BBS3- Set of 9 carbide boring bars to fit above |
|
17.50 |
|
 |
OPEN END ADAPTOR OPS1- The adaptor enables 2MT to be used on machines which normally require 3MT tooling, open ended for drawbar use. Comes with nut for easy ejection |
|
13.95 |
|
 |
MORSE TAPER SLEEVES SV12- I/S TAPER 1MT O/S TAPER 2MT- Hardened and ground. |
|
03.50 |
|
|
MORSE TAPER SLEEVES SV13- I/S TAPER 1MT O/S TAPER 3MT- Hardened and ground. |
|
03.50 |
|
|
MORSE TAPER SLEEVES SV14- I/S TAPER 1MT O/S TAPER 4MT- Hardened and ground. |
|
06.95 |
|
|
MORSE TAPER SLEEVES SV23- I/S TAPER 2MT O/S TAPER 3MT- Hardened and ground. |
|
03.50 |
|
|
MORSE TAPER SLEEVES SV34- INSIDE TAPER 3MT OUTSIDE TAPER 4MT- Hardened and ground. |
|
07.65 |
|
 |
MORSE TAPER EXTENSION SOCKETS EXT21- INSIDE TAPER 2MT OUTSIDE TAPER 1MT-Hardened and ground, |
|
07.65 |
|
|
MORSE TAPER EXTENSION SOCKETS EXT22- INSIDE TAPER 2MT O/S OUTSIDE 2MT-Hardened and ground, |
|
07.65 |
|
|
MORSE TAPER EXTENSION SOCKETS EXT32- INSIDE TAPER 3MT OUTSIDE TAPER 2MT-Hardened and ground, |
|
09.15 |
|
|
MORSE TAPER EXTENSION SOCKETS EXT23- INSIDE TAPER 2MT OUTSIDE TAPER 3MT-Hardened and ground, |
|
10.50 |
|
|
MORSE TAPER EXTENSION SOCKETS EXT33- INSIDE TAPER 3MT OUTSIDE TAPER 3MT-Hardened and ground, |
|
10.50 |
|
|
BLANK END ARBORS BEA1T 1MT TANGED END-Useful arbors with soft ends 7/8" dia. x 1" long, ideal for mounting flycutters, end mills, saws etc. |
|
03.25 |
|
 |
BLANK END ARBORS BEA1S 1MT THREADED END-Useful arbors with soft ends 7/8" dia. x 1" long, ideal for mounting flycutters, end mills, saws etc. Tapped 6 mm |
|
04.30 |
|
|
BLANK END ARBORS BEA2T 2MT TANGED END-Useful arbors with soft ends 7/8" dia. x 1" long, ideal for mounting flycutters, end mills, saws etc. |
|
03.70 |
|
|
BLANK END ARBORS BEA2S 2MT THREADED END-Useful arbors with soft ends 7/8" dia. x 1" long, ideal for mounting flycutters, end mills, saws etc. Tapped 3/8" BSW |
|
04.80 |
|
